Description
INSTRUCTIONS FOR USE
Hard surfaces:
Apply AGS 1 on to a dry, clean rag or an absorbent paper towel and wipe away the graffiti. Turn over the cloth so that only the clean part is used to the graffiti. Avoid wiping over dissolved graffiti. If there is a grease build up then wipe it off with clean rag. In order to stop the dissolution process, simply apply water on the surface already covered with the graffiti. It is always recommended to make a test on a small part of the surface.
Porous surfaces:
Apply AGS 1 with a low pressure sprayer. Let dwell for 5-10 minutes. Jet off with hot water and high pressure, (90°C, 150 bar/2175 PSI). Lance nozzle spread should be 15 – 25 degrees and water flow should be 15 to 20 litres/minute, (4-5 gal/minute). If pigment shadows remain, use AGS 60 or AGS 65.
Dosage
Use as concentrate.
Consumption
0,2-0,5 litre/m².
Storage
Store frost-free in original closed container.
Shelf life
Approximately 24 months in unopened container.
Precautions
Use protective gloves, clothing and glasses.
Marking
Warning
Harmful if swallowed. Causes skin irritation. Causes serious eye irritation.
Not classified as dangerous goods according to ADR.
For more information, see MSDS.
