Description
AGS POWER BLUE GEL is a very powerful graffiti and shadow remover to be used in cold weather and on difficult graffiti. Can be used on porous surfaces such as: granite, brick, concrete, lime, tiles, etc. AGS POWER BLUE GEL dissolves spray-paint graffiti, permanent markers and leather dye graffiti. For use on porous exterior surfaces.
Note! Do not use AGS POWER BLUE GEL on metal surfaces as aluminium. Make a test before removal.
Application instructions
Apply AGS POWER BLUE GEL with a brush. Agitate the surface well. Leave until graffiti has dissolved, 10-30 minutes depending on the surface, graffiti and weather conditions. Jet off with hot water and high pressure, 90°C, 150 bar/2175 PSI or adjust to the surface. Lance nozzle spread should be 15 – 25 degrees and water flow should be 15 to 20 litres/minute, (4-5 gal/minute). In case of shadows, apply AGS POWER BLUE GEL as a shadow remover, wait for 5-10 minutes before jet off with high pressure. Final rinsing with low pressure.
Dosage
Use as concentrate.
Consumption
0,5 – 1,0 litre/m².
Storage
Store frost-free in original closed container.
Shelf life
Approximately 24 months in unopened container.
Precautions
AGS POWER BLUE GEL is CORROSIVE, wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
