Description
AGS 60 removes shadowing left in substrate following graffiti removal, in special cases also paint removal. AGS 60 is formulated for use on the following materials: granite, slate, sandstone, glazed brick, treated marble, wood and non-organic paint. Readily biodegradable according to OECD test 302 b. For use on exterior and interior surfaces. Primarily used on absorbent surfaces.
Note! Do not use AGS 60 on aluminium and copper.
Application instructions
Apply AGS 60 with a brush on wet surface, leave to act for 2 – 30 minutes until graffiti/shadowing has dissolved. Jet off with high-pressure hot water, (40-90°C, 70-150 bar/1015-2175 PSI). Adjust pressure to suit surface condition. Note! For metal surfaces, the effectiveness can be reduced if too high pressure is used. A better result can be achieved if the surface is wiped with a sponge or cloth in the rinsing process. Repeat the procedure if required.
Dosage
Use as concentrate.
Consumption
0,2 – 0,5 litre/m² per application using concentrate.
Storage
Store frost-free in closed original container.
Shelf life
Approximately 24 months in unopened container.
Precautions
Special caution must be taken, as AGS 60 is a CORROSIVE product. Use protective clothing, visor, glasses and gloves. If product comes in contact with eyes, rinse with lot of water and immediately go to hospital. If skin contact, rinse with lot of water, go to hospital if necessary.
Marking
Danger
Harmful if swallowed. Causes severe skin burns and eye damage.
Classified as dangerous goods according to ADR.
UN 1814, POTASSIUM HYDROXIDE SOLUTION
Class: 8 PG: II
For more information, see MSDS.
