AGS 27 GEL is a readily biodegradable product used for removal of rust protective sealers.

Download safety sheet

Download product sheet

SKU: 3662 Categories: ,


AGS 27 GEL is a readily biodegradable product used for removal of rust protective sealers. AGS 27 GEL may be used on most surfaces: hard non-porous surfaces, such as polished stone surfaces, plastic, metal, or porous surfaces such as concrete, brick, granite, plaster etc. For use on exterior and interior surfaces. On porous surfaces: Use AGS 27 GEL in combination with AGS 25. Readily biodegradable.

Application instructions

Smooth surfaces:
When graffiti is spread over an extensive area, apply AGS 27 GEL and allow the product to remain on the graffiti for 10-30 minutes, depending on weather conditions, the age of the graffiti and thickness. Jet off with medium pressure, approx. 100 bars, nozzle angle 15-25°, 20 litres/min hot water (60°-90° C).

Porous surfaces:
Apply AGS 25 with a low-pressure sprayer, and then apply AGS 27 GEL with a brush. Let dwell for 30 minutes – 5 hours, depending on weather conditions. Jet off with high-pressure hot water (70-90°C, approx. 150 bar, nozzle angle 15-25°, 20 litre/min.). If required repeat the process. Note! When cold weather, all graffiti removers need more time to dissolve the graffiti. Likewise more time is required for thick layers and when substrate is porous.

Stir and use as concentrate.

0,2-0,5 litre/m².

Store frost-free in closed original container.

Shelf life
Approximately 24 months in unopened container.

Use normal protective clothing, gloves and safety glasses.

Additional information




Aluminum – anodized, Aluminum – untreated, Brick, Granite – polished, Hard plastic, Industrial painted surfaces, Limestone, Marble – polished, Metal surfaces, Mineral and stone surfaces, Painted facade surfaces, Plate, Rubber, Sandstone, Surface protected surfaces, Terrazzo